The type of vehicle normally found within factories, warehouses and other work locations where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism situated on the front of the forklift that hydraulically lowers and raises the load. The "cat" is the area that is protected where the forklift driver sits.
Forklifts can lift loads which weigh between one to five tons. Several models can be utilized to raise shipping containers and much heavier loads.
Forklift tires must be maintained and checked regularly. The types of tires on different forklifts differ based on factors like for instance frequency of use, weight of the loads and ground surfaces. Every forklift driver should have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You should regularly check the tires. Watch for indications of wear and damage to the tires. If the wear on the tire exceeds 40%, it should be replaced.
When purchasing tires, make sure that you are buying the correct kind - solid, pneumatic or polyurethane.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you can change the tires easily.
To remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you just have one jack, lower the forklift, then reposition the jack at the next tire.
A repair company can offer on-site tire repair. If the tire is too big for both mobile and in-house tire presses, the tire which is damaged must be transported to a shop which has a stationary tire press.