Change a Propane Tank
Propane powered forklifts are commonly utilized in warehouses. The forklift is designed with the propane tank mounted behind the operator. The tanks, that look a lot like beer kegs, need to be replaced every so often as they have a limited lifespan. Forklift operators should use care when handling propane tanks. Compressed gases are very hazardous, particularly since the gas is flammable. Always utilize caution when replacing and removing propane tank to prevent being injured.
1 To change a propane tank, first stop the forklift and leave the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This procedure burns the gas off in the transfer hose that connects the engine and the tank. Prior to taking the second steps, put on the proper safety equipment, such as insulated gloves made of either leather or neoprene. It is very important for you to protect your skin from touching the compressed gas, that is very cold.
2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this happens, inspect the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks in the area of the valve, and then perform the leak checking process over again. Persistent leaks mean that the connecting hose and nut must be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Afterward you can start the forklift and continue working.